Mini Pendant DIY Kit - MP2CP
Examples of Finished Pendants made from our MP2CP DIY
Kits and Options
|
Mini Pendant DIY Kit - MP2CP |
Below is a description and photo of the various example pendants that have been made using the MP2CP DIY kit and options. Click on any of the photos to see a higher resolution image.
These files are for
example ONLY. They are not meant to be complete kits or instructions. They are
intended to show you ideas of what can be fabricated using the MP2CP and
options. You may need to modify them to meet your needs.
All downloads are "zip" files.
This page is under construction as I get files cleaned up and loaded. Last updated 8/27/2010
|
Cost Effective Single Outlet Enclosure This enclosure is a simple "single gang" Type FSE plastic electrical outlet box. I purchased it from Home Depot for under $3. It is made by Cantex and your Home Depot may carry a different brand. You may need to adjust the drawings to match your "single gang" enclosure. |
|
|
|
Single Outlet with ThumbStick sans Rotary Switch. This uses the same enclosure as above. It subtracts the rotary switch and adds the ThumbStick option. There are users that have requested a simple "Start, Pause, Stop, and Navigation" pendant and this fills that request. |
|
|
|
Cost Effective Double Outlet Enclosure using Navigation Buttons This enclosure is a simple "two gang" Type FSE plastic electrical outlet box. I purchased it from Home Depot for under $5. It is made by Cantex and your Home Depot may carry a different brand. You may need to adjust the drawings to match your "two gang" enclosure. |
|
|
|
Cost Effective Double Outlet Enclosure using ThumbStick This uses the same enclosure as above. It swaps out the 5 navigation buttons for the ThumbStick option. |
|
|
|
Avery Design Pro files for Single and Double Outlet Boxes Avery Design Pro is a free download from www.avery.com . It can be used to make color pendant panels that can be printed and laminated. Once trimmed, they add a nice colorful touch to any DIY pendant. Click on the "download" to the right to see a few examples for single and dual gang boxes. |
|
|
|
Pendant Using an Instrument Enclosure (includes files for engraved front panel and Avery Label Maker panel) Uses the 200 Series T-Case-Medium from Box Enclosures |
|
|
|
Pendant Made for Linux
EMC2 Using ThumbStick
Option Using Booted Enclosure. Be sure and order the Height Expander Panel (adds 0.50") Uses the 100 Series Shell Case from Box Enclosures |
|
|
|
Pendant Made for Mach3
Using the ThumbStick Option Using Booted Enclosure Be sure and order the Height Expander Panel (adds 0.50") Uses the 90 Series Shell Case from Box Enclosures. |
|
|
|
Pendant Customized for Left-Handed or Right-Handed Users (This is NOT a dual ThumbStick Model, just showing possible left or right handed operation of ThumbStick) Uses the 200 Series T-Case-Small from Box Enclosures |
|
|
|
Pendant Using an Instrument Enclosure with
LCD (LCD operation not available until late-September 2010) Uses the 200 Series T-Case-Medium from Box Enclosures |
|
|
| (future place of next pendant enclosure example) |
|
To purchase any of our Kits, Combos, or Options, click here.
